Problems with Cakewalk BREVERB 2

[norfolkmastering]

Hi Alexey

I'm having trouble getting most of the Cakewalk BREVERB 2 controls to be read by AZ Controller.
The common controls e.g. 'DRY' level work okay but I cannot get any of the controls specific to BANKS e.g. 'Plate Time' to be reported by AZ Controller.

I have attached a test preset.  Could you have a look please.

Regards
Robert

[azslow3]

For me with Text Value/Display and CC "loop" feedback parameter 63 (PLATE: Time) works as expected (value is displayed and CC is sent).

What doesn't work for you? I mean which stage doesn't work ? F.e. you can't see "PLATE: Time" in the selection list, with added "Text Value" in the Logic and "Play" the value is not reported on the Overview tab, monitor is not triggered, CC is not sent, etc...

[norfolkmastering]

To take control 'plate time' as an example:
I can select 63-PLATE:Time from the parameter list.
But there is no output from the feedback MIDI when I monitor using MIDI-OX

The feedback MIDI output for the control 'DRY LEVEL' (1 - MASTER Dry-Level) is working correctly.

I do not understand your reference 'with added "Text Value"?  Have I made a mistake in my preset?

Also note: that in order to access the Plate Time Control I have to first select (on the BREVERB 2 Control Screen) BANKS 2. PLATE and then any of the available PRESETS, e.g. 1. Snare Power Plate.  Is that how you are testing?

Regards
Robert

[azslow3]

I have tested with "loop" flag set, then sent MIDI messages appear as "Last MIDI event". "Text Value" + "Display" allow to see real value on build-in Display.

I am turning the knob Time on Plate tab. Working as expected on 2 computers.

But I remember long time ago something with Breverb was buggy... but I can't remember what.

You can also automation lanes work for parameters you want. Technically Cakewalk/AZ Controller are using parameter automations of plug-in. So if there are problems with plug-in, both will probably fail.

[norfolkmastering]

Thanks Alexey
I'll keep testing and try to find the issue.
Can I just check that you did not find any issue with my test preset?
Regards
Robert

[azslow3]

Well, I had to set "loop" flag in the Feedback so I can see it is sending and I have selected parameter 63. But yes, I was using your test preset.

Note I don't claim there is no issue with AZ Controller. That is why I have ask to check at which "stage" it is not working for you. Inserting "Text Value" + "Display" and using "Play" may help identify that.