Print Page - Right oriented text output for values [implemented]

Title: Right oriented text output for values [implemented]
Post by: Hermu on May 12, 2015, 10:25:44 PM

i have to send a SysEx Message to my controller with values 0..127 and these values should be right oriented, but output is always left oriented.

Title: Re: Right oriented text output for values
Post by: azslow3 on May 12, 2015, 11:54:03 PM

Are you speaking about right aligning text or value? Text is in plan, but I have never seen it as critical. With value it is more complicated, for variations which I have seen so far, "Range" action was sufficient. In case you provide the example (or point to the documentation for the device), I will see what I can do.

Title: Re: Right oriented text output for values (numbers)
Post by: Hermu on May 13, 2015, 12:05:50 AM

i mean continues changed controller values should have leading 0x20 depending from number of digits and selected format Abbr. to <n> or Trim to <n>.
" 0", " 32", "127"

between "Parameter Value" and format is a empty space for text orientation selector -> see attachement

Title: Re: Right oriented text output for values
Post by: azslow3 on May 13, 2015, 12:16:59 PM

I have added alignment into the latest test version (b201).

Title: Re: Right oriented text output for values
Post by: Hermu on May 13, 2015, 12:51:01 PM

Thanks, works perfect :)

After this testversion is released, i will attach my new preset with display messages

AZSlow

AZ Controller plug-in for Cakewalk SONAR => Wishes => Topic started by: Hermu on May 12, 2015, 10:25:44 PM